NBF-32016 Mounting Plate Kit

Product Overview

This mounting plate kit will allow you to put either your Falcon or Kulp controller into a Bud NBF-32016 box with up to 8 pigtails of your choice, 1 power supply, and up to 4 network glands to allow for ultimate connectivity to your display. The mounting plate kit comes with all mounting hardware and the two plastic plates pictured, all other items pictured are for display purposes only and sold separately. To create a full build, these are the necessary parts needed:

• 1 x Bud NBF-32016 Enclosure
• 1 x Slim height Power supply of your choice.
• 1 x AC Power Cords
• 1 x PG9 Gland Pack
• 1 x PG7 Gland Pack
• 0 to 4 x Network Gland with Dongle (it's a good idea to have at least one of these for every network port on your controller. The other 3 would be used for the DMX and receiver outputs from your controller or expansions)
• 2 feet of 10AWG Bulk Cable Red
• 2 feet of 10AWG Bulk Cable Black
• 1 to 8 x Pigtails of your choice. If you go the route of 32, it is a good idea to get 16 of the 18" style, and 16 of the 30" style
• 1 x Heat Shrink Labels. Get a 1 - 16 set to label each of your pigtails. We carry 5 colors.
• Plate will support the Falcon F48v1, F48v4, Kulp K8-B, Kulp K8-PB, Kulp K40D-PB, and Kulp K4-PB

Want some help building a full controller? Check out our Build-A-Kit page for controllers. It will assist you in finding all the items you need for a full controller buildout https://www.wiredwatts.com/build-a-controller-kit